All MHS sinkware is made of Type 304 stainless steel, featuring premium grade 18/8-10 chromium-nickel that is hygienic, corrosion and scratch resistant and durable and is easy to care for the lifetime of your sink.
¡¤How to clean stainless steel
Stainless steel is remarkably easy to clean. You can quickly remove fingerprints, dust and ordinary stains simply by rubbing the stainless with a clean, damp cloth and wiping dry. It's no problem at all to remove stubborn or sticky materials such as burnt-on grease, dried food particles, and coffee stains if you follow the suggestions offered below. With reasonable care, your stainless steel will stay new-looking for years to come.
"ALWAYS"
- Clean everyday by thoroughly rinsing with a mild soap, warm water and wipe dry.
- Rub lightly with a soft cloth in the direction of grain lines on a regular basis for additional preventive cleaning.
- Keep the sink free of any standing water as this can cause a buildup of mineral deposit, which can affect the appearance of your sink.
- Any stubborn stains should be removed by scrubbing in the direction of the grain with a mild abrasive such as Comet. Always rinse the sink after using any cleaning agent and wipe dry.
- Clean any mineral deposits built up over time with a mild solution of vinegar and water followed by a thorough flushing with water.
- Remove any scratches with a Scotch-Brite pad and cleaning agent rubbing in the direction of the grain. NOT RECOMMENDED FOR MIRROR FINISH.
"NEVER"
- Leave water spots, steel cookware or utensils in the sink for lengthy period ; iron particles often develop rust spots in the stainless steel surface.
- Use a steel wool or scoring pad as it damages the sink surface and causes discoloration.
- Let household cleaning agents or bleach sit in your sink for long periods of time as this may ruin the finish of your sink.
- Leave rubber mats, sponges or cleaning pads in the sink overnight as this will trap water and could stain and discolor the sink surface.
- Use any drain cleaning products containing sulfuric or hydrochloric acid as this will attack the sink. Silver cleaners can also contain acids that will damage the sink surface.
- Use the inside of the sink as a cutting surface.
|
